18th Century Oak Longcase Clock by Mathews of Leighton
18th Century Oak Longcase Clock by Mathews of Leighton
18th Century Oak Longcase Clock by Mathews of Leighton
18th Century Oak Longcase Clock by Mathews of Leighton

18th Century Oak Longcase Clock by Mathews of Leighton

c. 1790 England

Offered by Windsor House Antiques Ltd

£1,480 gbp
Request Information Call Dealer
Favourite Item
Small late 18th century oak longcase clock by Mathews of Leighton with thirty hour movement, brass face with original spandrels. Unrestored movement but case in very good order.
Mathews Clock making family in Leighton Buzzard to include William (circa 1830) John (1830 - 1847) Alfred (1847- 1877).
Traditionally, longcase clocks were made with two types of movement: eight-day and one-day (30-hour) movements. A clock with an eight-day movement required winding only once a week, while generally less expensive 30-hour clocks had to be wound every day. Eight-day clocks are often driven by two weights – one driving the pendulum and the other the striking mechanism, which usually consisted of a bell or chimes. Such movements usually have two keyholes on either side of the dial to wind each one. By contrast, 30-hour clocks often had a single weight to drive both the timekeeping and striking mechanisms. Some 30-hour clocks were made with false keyholes, for customers who wished that guests to their home would think that the household was able to afford the more expensive eight-day clock. Most longcase clocks are cable-driven, meaning that the weights are suspended by cables. If the cable was attached directly to the weight, the load would cause rotation and untwist the cable strands, so the cable wraps around a pulley mounted to the top of each weight. The mechanical advantage of this arrangement also doubles the running time allowed by a given weight drop.
Oak wood has a great density, great strength and hardness, and is very resistant to insect and fungal attack because of its high tannin content. It also has very appealing grain markings, particularly when quarter sawn. Oak planking was common on high status Viking long ships in the 9th and 10th centuries. The wood was hewn from green logs, by axe and wedge, to produce radial planks, similar to quarter-sawn timber. Wide, quarter-sawn boards of oak have been prized since the Middle Ages for use in interior panelling of prestigious buildings such as the debating chamber of the House of Commons in London and in the construction of fine furniture. Oak wood, from Quercus robur and Quercus petraea, was used in Europe for the construction of ships, especially naval men of war, until the 19th century, and was the principal timber used in the construction of European timber-framed buildings
Height 75.25 inch (191.13 cm)
Width 17.00 inch (43.18 cm)
Depth 9.50 inch (24.13 cm)
Stock Code
Windsor House Antiques Ltd

Windsor House Antiques Ltd
Barnwell Manor

Opening Hours
View Dealer Location
Member Since 2013
Members of
View Full Details